Dirt Control Technical Information

Hard Floor Cleaning

Getting rid of dirt on the complete range of hard floor surfaces – and then controlling the rate of resoiling!

Micrionix™ combines the latest in microfibre technology with specialist ionisation cleaning solutions to provide really clean, stain free hard floors that stay cleaner for longer. By separately targeting each of the three types of dirt – loose dirt, embedded dirt and stuck dirt, Micrionix™ ensures that dirt removal is optimised without leaving any resoiling residue.

Micrionix™ Hard Floor Cleaning

The Micrionix™ hard floor care system is a simple, labour saving, ongoing maintenance programme for all types of hard floors. Using Zing advanced micro-thin film technology to install a 'dirt shield' on the floor surface Micrionix™ :

delivers a consistently high level of floor appearance
reduces resoiling
eliminates dirt & finish build up
increases floor safety
reduces dust by up to 65%
reduces daily and periodic floor care labour costs
resists dirt
reduces floor care materials by up to 30%
eliminates need for floor finish re-stripping

Specialist solutions and procedures suitable for cleaning:

Vinyl composite tile (VCT)
Wear layer vinyl
Linoleum
Rubber
PVC safety flooring
Ceramic
Terracotta
Slate
Marble
Limestone
Sandstone
Granite
Terrazzo

Example Solution:

Micrionix™ Hard Floor Cleaning standard procedures for VCT floors;

Regularly removing loose dirt is key to keeping hard floors looking clean. ZXLDR Loose Dirt Remover sprayed onto dust mop holds and controls loose dirt and dust by up to 65%. When used as a daily maintainer it will keep the dust levels to a minimum whilst also preventing dirt and dust being disbursed around your premises and onto other surfaces. It will reduce the amount of dirt that can become stuck onto or embedded into floor finish.

Most marks on hard floor surfaces are dirt that has become wet and then stuck to the floor surface. With the Micrionix™ hard floor care system this stuck dirt is only stuck to the micro-thin dirt shield film which sits on top of the floor finish. Removing and replacing this film with ZXDS Dirt Shield and Stuck Dirt Remover' saves around 50% of floor labour cost compared to using most floor care products. It replaces spray buffing, increases the life of floor finishes and extends the life of pads. ZXDS Dirt Shield and Stuck Dirt Remover can be used in different ways depending on the floor size, the amount of soiling and the equipment available.

Embedded dirt is removed from all types of hard floors using technology based on the cosmetic industry. ZXEDR Embedded Dirt Remover opens the pores of the top two coats of finish and lifts out the dirt without removing any finish. ZXEDR can be used from a mop and bucket, with low or high speed rotary machines and scrubber dryers.

For Micrionix™ solutions for other hard floor types contact Command Environmental Control -